|
Jeep Wrangler Mopar Performance Suspension Parts
 |
2 Door 2 Inch Lift Kit
Moderate lift, Maximum performance - Most moderate JK lifts use coil spring spacers with the factory coil springs. With this method you get lift, but suspension extension travel (controlled by shock length) must be limited or the coil springs and spacers will unseat. Mopar's replacement coil spring lift allows as much suspension articulation as most 4" Lift Kits, resulting in amazing performance with minimal impact on Jeep Wrangler center-of-gravity. As you would expect from the Mopar Performance Design Team, nothing was left unattended.
Wheel and Tire Recommendations:
Stock tires and / or wheels can be used.
Ideal aftermarket wheel specifications are 17" Diameter x 9" Wide with 4.5" Back Spacing.
Tire diameter: 33" to 35"
Tire Width: No greater than 12.5” when used on stock wheels, or aftermarket wheels with stock Back Spacing (6.0").
Check wheel size recommendations of tire manufacturer. 13.5" width tires can be run with a 4.5" Back Space wheel, but some fender scrub may be experienced during full articulation.
Wheel Diameter: No less than 17"
Wheel Width: 7.5" (stock Rubicon) to 9".
Wheel Back Spacing: 6" (stock) to 4.5" (preferred).
As Back Spacing dimension decreases, track width and stability increases
Installation Time: 4 to 5 hours for a professional technician familiar with the installation.
| Available for 2007-2009 Jeep Wrangler 2 Door
|
Availability:
Ships With 3 Business Days |
|
 |
|
4 Door 2 Inch Lift Kit
Moderate lift, Maximum performance - Most moderate JK lifts use coil spring spacers with the factory coil springs. With this method you get lift, but suspension extension travel (controlled by shock length) must be limited or the coil springs and spacers will unseat. Mopar's replacement coil spring lift allows as much suspension articulation as most 4" Lift Kits, resulting in amazing performance with minimal impact on Jeep Wrangler center-of-gravity. As you would expect from the Mopar Performance Design Team, nothing was left unattended.
Wheel and Tire Recommendations:
Stock tires and / or wheels can be used.
Ideal aftermarket wheel specifications are 17" Diameter x 9" Wide with 4.5" Back Spacing.
Tire diameter: 33" to 35"
Tire Width: No greater than 12.5” when used on stock wheels, or aftermarket wheels with stock Back Spacing (6.0").
Check wheel size recommendations of tire manufacturer. 13.5" width tires can be run with a 4.5" Back Space wheel, but some fender scrub may be experienced during full articulation.
Wheel Diameter: No less than 17"
Wheel Width: 7.5" (stock Rubicon) to 9".
Wheel Back Spacing: 6" (stock) to 4.5" (preferred).
As Back Spacing dimension decreases, track width and stability increases
Installation Time: 4 to 5 hours for a professional technician familiar with the installation.
| Available for 2007-2009 Jeep Wrangler 4 Door
|
Availability:
Ships With 1 Business Days |
|
|
 |
Dana 60 Rear Military Axle Assembly
Available exclusively from Mopar Performance Jeep Wrangler military-grade axle assemblies for your Jeep Wrangler. These tough, genuine Jeep assemblies are designed for the military Wrangler (J8) and provide the next level of off-road performance for Wranglers. They come fully assembled and well equipped with 4.10 gears, JK wheel speed sensors, and massive, heavy-duty disc brake calipers and rotors. The Dana 60 rear axle is configured for leaf spring mounts. Adaptation of the rear axle to fit the suspension of any Jeep Jeep Wrangler is the responsibility of the purchaser
| Available for 2007-2009 Jeep Wrangler
|
Availability:
Ships With 3 Business Days |
|
|
 |
Rubicon Locking Front Axle Assembly
Now available exclusively from Mopar Performance Rubicon front axle assemblies. Provides the next level of off road performance to your CJ, YJ or TJ. Axles are shipped with the current Jeep Wrangler Rubicon suspension brackets installed. They are completely assembled, with 4.10 gear ratio and a locking differential with locking sensor. Adaptation into a previous model Wrangler will be the responsibility of the purchaser.
| Available for All Jeep Wrangler
|
Availability:
Ships With 3 Business Days |
|
|
 |
Rubicon Locking Rear Axle Assembly
Now available exclusively from Mopar Performance Rubicon rear axle assemblies. Provides the next level of off road performance to your CJ, YJ or TJ. Axles are shipped with the current Jeep Wrangler Rubicon suspension brackets installed. They are completely assembled, with 4.10 gear ratio and a locking differential with locking sensor. Adaptation into a previous model Wrangler will be the responsibility of the purchaser.
| Available for All Jeep Wrangler
|
Availability:
Ships With 1 Business Days |
|
|
|
|
