Mopar Performance Parts and Accessories
 |
Jeep Wrangler 2 Door 2 Inch Lift Kit
Moderate lift, Maximum performance - Most moderate JK lifts use coil spring spacers with the factory coil springs. With this method you get lift, but suspension extension travel (controlled by shock length) must be limited or the coil springs and spacers will unseat. Mopar's replacement coil spring lift allows as much suspension articulation as most 4" Lift Kits, resulting in amazing performance with minimal impact on Jeep Wrangler center-of-gravity. As you would expect from the Mopar Performance Design Team, nothing was left unattended.
Wheel and Tire Recommendations:
Stock tires and / or wheels can be used.
Ideal aftermarket wheel specifications are 17" Diameter x 9" Wide with 4.5" Back Spacing.
Tire diameter: 33" to 35"
Tire Width: No greater than 12.5” when used on stock wheels, or aftermarket wheels with stock Back Spacing (6.0").
Check wheel size recommendations of tire manufacturer. 13.5" width tires can be run with a 4.5" Back Space wheel, but some fender scrub may be experienced during full articulation.
Wheel Diameter: No less than 17"
Wheel Width: 7.5" (stock Rubicon) to 9".
Wheel Back Spacing: 6" (stock) to 4.5" (preferred).
As Back Spacing dimension decreases, track width and stability increases
Installation Time: 4 to 5 hours for a professional technician familiar with the installation.
| Available for 2007-2009 Jeep Wrangler 2 Door
|
Availability:
Ships With 3 Business Days |
|
 |
 |
Chrysler 300 3.5L Mopar Performance Cold Air Intake
What's so great about cold air intakes? Cold air is much denser than hot, humid air and holds more oxygen. More oxygen going into an engine equals more combustion, thus more power
| Available for 2005-2009 Chrysler 300 With 3.5L V6 Engine
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Challenger 3.5L Mopar Performance Cold Air Intake
What's so great about cold air intakes? Cold air is much denser than hot, humid air and holds more oxygen. More oxygen going into an engine equals more combustion, thus more power
| Available for 2009 Dodge Challenger With 3.5L V6 Engine
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Charger 3.5L Mopar Performance Cold Air Intake
What's so great about cold air intakes? Cold air is much denser than hot, humid air and holds more oxygen. More oxygen going into an engine equals more combustion, thus more power
| Available for 2006-2009 Dodge Charger With 3.5L V6 Engine
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Magnum 3.5L Mopar Performance Cold Air Intake
What's so great about cold air intakes? Cold air is much denser than hot, humid air and holds more oxygen. More oxygen going into an engine equals more combustion, thus more power
| Available for 2005-2008 Dodge Magnum With 3.5L V6 Engine
|
Availability:
Ships With 1 Business Days |
|
|
 |
Jeep Liberty 3.7L Cold Air Intake
Add Horsepower and Torque to your Jeep Liberty
| Available for 2005-2007 Jeep Liberty With 3.7L V6 Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Jeep Wrangler 4 Door 2 Inch Lift Kit
Moderate lift, Maximum performance - Most moderate JK lifts use coil spring spacers with the factory coil springs. With this method you get lift, but suspension extension travel (controlled by shock length) must be limited or the coil springs and spacers will unseat. Mopar's replacement coil spring lift allows as much suspension articulation as most 4" Lift Kits, resulting in amazing performance with minimal impact on Jeep Wrangler center-of-gravity. As you would expect from the Mopar Performance Design Team, nothing was left unattended.
Wheel and Tire Recommendations:
Stock tires and / or wheels can be used.
Ideal aftermarket wheel specifications are 17" Diameter x 9" Wide with 4.5" Back Spacing.
Tire diameter: 33" to 35"
Tire Width: No greater than 12.5” when used on stock wheels, or aftermarket wheels with stock Back Spacing (6.0").
Check wheel size recommendations of tire manufacturer. 13.5" width tires can be run with a 4.5" Back Space wheel, but some fender scrub may be experienced during full articulation.
Wheel Diameter: No less than 17"
Wheel Width: 7.5" (stock Rubicon) to 9".
Wheel Back Spacing: 6" (stock) to 4.5" (preferred).
As Back Spacing dimension decreases, track width and stability increases
Installation Time: 4 to 5 hours for a professional technician familiar with the installation.
| Available for 2007-2009 Jeep Wrangler 4 Door
|
Availability:
Ships With 1 Business Days |
|
|
 |
Jeep Wrangler 4.5 Inch Long Arm Lift Kit
The Mopar Performance Jeep Wrangler JK 4.5" suspension is designed to create enough under-Jeep Wrangler space for massive 37" tires to operate inside the Wrangler’s fender openings. The kit is designed to fit any 2007-2008 4-door model from the X to the Rubicon. The 4-door kit comes complete with every part needed to bring your Jeep Wrangler to the next level of performance including long-arm control arms, u-joint driveshafts and specially-tuned Bilstein shocks.
Mopar's new Trail initiative brings a wide array of driveline and suspension upgrades for the hot-selling 2-and 4-door Wranglers!
| Available for 2007-2009 Jeep Wrangler 4 Door
|
Availability:
Ships With 3 Business Days |
|
|
 |
440 Magnum Emblem
Our Price Starting At: $46.33
|
Availability:
Ships With 3 Business Days |
|
|
 |
440+6 Hood Decal
Replace damaged or badly faded hood scoop decals for your favorite big block with these excat reproductions
| Available for 1970 Road Runner and GTX 440 Six Barrel
|
Availability:
Ships With 3 Business Days |
|
|
 |
5.7L Hemi Carbureted Mopar Performance Conversion Kit
Conversion Packages to install late model 5.7L Hemi engines into older Mopars. These packages have all the necessary fuel, intake and electrical management system components needed to adapt a 2004 or earlier model year 5.7L Hemi into older cars and trucks. These Conversion Packages replace the factory plastic intake manifold and drive-by-wire throttle body with a more user-friendly aluminum intake and top-feed Cable driven carburetor. Now you can offer enthusiasts who may have acquired a used 5.7L Hemi engine from a salvage yard a complete package.
Availability:
Ships With 3 Business Days |
|
|
 |
Dodge Durango 5.7L Hemi Mopar Performance Camshaft
This 5.7L Hemi Mopar Performance camshaft was designed applying the same technology utilized on NASCAR racing engines as a drop-in replacement for the stock cam. It will increase airflow and engine output at 3,000 rpm and above while maintaining low rpm drivability characteristics. Requires Non-MDS hydraulic lifters.
| Available for 2004-2005 Dodge Durango With 5.7L Hemi Engine and Without MDS
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Ram 5.7L Hemi Mopar Performance Camshaft
This 5.7L Hemi Mopar Performance camshaft was designed applying the same technology utilized on NASCAR racing engines as a drop-in replacement for the stock cam. It will increase airflow and engine output at 3,000 rpm and above while maintaining low rpm drivability characteristics. Requires Non-MDS hydraulic lifters.
| Available for 2003-2007 Dodge Ram With 5.7L Hemi Engine and Without MDS
|
Availability:
Ships With 1 Business Days |
|
|
|
Jeep Grand Cherokee 5.7L Hemi Mopar Performance Camshaft
This 5.7L Hemi Mopar Performance camshaft was designed applying the same technology utilized on NASCAR racing engines as a drop-in replacement for the stock cam. It will increase airflow and engine output at 3,000 rpm and above while maintaining low rpm drivability characteristics. Requires Non-MDS hydraulic lifters.
| Available for 2005 Jeep Grand Cherokee With 5.7L Hemi Engine and Without MDS
|
Availability:
Ships With 1 Business Days |
|
|
 |
Chrysler 300 5.7L Hemi Mopar Performance CNC-Ported Cylinder Heads
Whether on the street or the track, these bolt-on, CNC-ported cylinder heads are equipped with the highest quality parts and technology available to deliver optimum performance. Capable of handling camshafts with valve lifts up to .600". Designed to optimize flow while maintaining optimum port velocity
| Available for 2005-2008 Chrysler 300 With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Dodge Charger 5.7L Hemi Mopar Performance CNC-Ported Cylinder Heads
Whether on the street or the track, these bolt-on, CNC-ported cylinder heads are equipped with the highest quality parts and technology available to deliver optimum performance. Capable of handling camshafts with valve lifts up to .600". Designed to optimize flow while maintaining optimum port velocity
| Available for 2006-2008 Dodge Charger With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Dodge Durango 5.7L Hemi Mopar Performance CNC-Ported Cylinder Heads
Whether on the street or the track, these bolt-on, CNC-ported cylinder heads are equipped with the highest quality parts and technology available to deliver optimum performance. Capable of handling camshafts with valve lifts up to .600". Designed to optimize flow while maintaining optimum port velocity
| Available for 2004-2008 Dodge Durango With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Dodge Magnum 5.7L Hemi Mopar Performance CNC-Ported Cylinder Heads
Whether on the street or the track, these bolt-on, CNC-ported cylinder heads are equipped with the highest quality parts and technology available to deliver optimum performance. Capable of handling camshafts with valve lifts up to .600". Designed to optimize flow while maintaining optimum port velocity
| Available for 2005-2008 Dodge Magnum With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Dodge Ram 5.7L Hemi Mopar Performance CNC-Ported Cylinder Heads
Whether on the street or the track, these bolt-on, CNC-ported cylinder heads are equipped with the highest quality parts and technology available to deliver optimum performance. Capable of handling camshafts with valve lifts up to .600". Designed to optimize flow while maintaining optimum port velocity
| Available for 2003-2008 Dodge Ram With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Jeep Commander 5.7L Hemi Mopar Performance CNC-Ported Cylinder Heads
Whether on the street or the track, these bolt-on, CNC-ported cylinder heads are equipped with the highest quality parts and technology available to deliver optimum performance. Capable of handling camshafts with valve lifts up to .600". Designed to optimize flow while maintaining optimum port velocity
| Available for 2006-2008 Jeep Commander With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Jeep Grand Cherokee 5.7L Hemi Mopar Performance CNC-Ported Cylinder Heads
Whether on the street or the track, these bolt-on, CNC-ported cylinder heads are equipped with the highest quality parts and technology available to deliver optimum performance. Capable of handling camshafts with valve lifts up to .600". Designed to optimize flow while maintaining optimum port velocity
| Available for 2005-2008 Jeep Grand Cherokee With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
5.7L Hemi MPI Mopar Performance Conversion Kit
Conversion Packages to install late model 5.7L Hemi engines into older Mopars. These packages have all the necessary fuel, intake and electrical management system components needed to adapt a 2004 or earlier model year 5.7L Hemi into older cars and trucks. These Conversion Packages replace the factory plastic intake manifold and drive-by-wire throttle body with a more user-friendly aluminum intake and top-feed Cable driven throttle body. Now you can offer enthusiasts who may have acquired a used 5.7L Hemi engine from a salvage yard a complete package.
Availability:
Ships With 3 Business Days |
|
|
 |
Chrysler 300 5.7L Mopar Performance Cold Air Intake
Add Horsepower and Torque to your Chrysler 300 5.7L Hemi Engine. Combine with a Cat-Back Exhaust system for a throaty, aggressive sound.
| Available for 2005-2009 Chrysler 300 With 5.7L Hemi Engine
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Challenger 5.7L Mopar Performance Cold Air Intake
Add Horsepower and Torque to your Dodge Challenger 5.7L Hemi Engine. Combine with a Cat-Back Exhaust system for a throaty, aggressive sound.
| Available for 2009 Dodge Challenger With 5.7L Hemi Engine
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Charger 5.7L Mopar Performance Cold Air Intake
Add Horsepower and Torque to your Dodge Charger 5.7L Hemi Engine. Combine with a Cat-Back Exhaust system for a throaty, aggressive sound.
| Available for 2006-2009 Dodge Charger With 5.7L Hemi Engine
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Magnum 5.7L Mopar Performance Cold Air Intake
Add Horsepower and Torque to your Dodge Magnum 5.7L Hemi Engine. Combine with a Cat-Back Exhaust system for a throaty, aggressive sound.
| Available for 2005-2008 Dodge Magnum With 5.7L Hemi Engine
|
Availability:
Ships With 1 Business Days |
|
|
 |
Aluminum Cylinder Head
Interchangeable with production, these aluminum heads offer a weight reduction of 50 lbs. per engine set
Our Price Starting At: $1.00
|
| Available for 426 and 528 Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Chrysler 300 Anti Sway Bar Kit
Increase steering response and handling. Front bar is 1.25 Inch and the rear is .875"
| Available for 2005-2009 Chrysler 300C & SRT-8
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Charger Anti Sway Bar Kit
Increase steering response and handling. Front bar is 1.25 Inch and the rear is .875"
| Available for 2006-2009 Dodge Charger R/T & SRT-8
|
Availability:
Ships With 1 Business Days |
|
|
|
Dodge Magnum Anti Sway Bar Kit
Increase steering response and handling. Front bar is 1.25 Inch and the rear is .875"
| Available for 2005-2008 Dodge Magnum R/T & SRT-8
|
Availability:
Ships With 1 Business Days |
|
|
|
Jeep Commander Anti Sway Bar Kit
Jeep Commander 5.7L Anti-Sway Bar Kit includes both front and rear bars and bushing sets
| Available for 2006-2008 Jeep Commander
|
Availability:
Ships With 1 Business Days |
|
|
 |
Black Wrinkle Cast Aluminum Valve Cover Set
Dress up your 426 Hemi with this handsome Black Wrinkle Cast Aluminum Hemi Valve Cover Set
| Available for 1966 and Newer Street Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Block Hardware Package
This Block Hardware Package includes all necessary dowels, plugs, bushings and keys, as well as core plugs, rear cam bearing plug, drive gear bushing and head dowels.
| Available for Hemi and Big Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Breather
| Available for Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Camshaft
Developed, dyno'd and track tested by engineers, these cams are developed for increased power and rpm potential while maintaining reliability and the best possible low-speed characteristics
Our Price Starting At: $206.55
|
| Available for 1968-1971 Hemi Engines
|
Availability:
Ships With 1 Business Days |
|
|
 |
Camshaft Bearings
Complete engine set of Camshaft Bearings
| Available for 426 Hemi and Big Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Camshaft Sprocket Bolt Kit
Sprocket Bolt Kit for 3-Bolt Mounting
| Available for 426 Hemi and Big Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Cast Iron Cylinder Head
Stiffer and stronger than original, increased material permits porting for improved airflow
| Available for 426 Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Chrome Breather Cap
Chrome Breather Cap for use with stamped steel Hemi Black Wrinkle and Chrome Valve Covers
| Available for 1964-1969 426 Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
 |
Chrome Distributor Hold-Down Clamp
Under the hood, every detail matters, and chrome is the perfect enhancement.
Our Price Starting At: $13.49
|
| Available for Small Blco, Big Block and Hemi Engines
|
Availability:
Ships With 1 Business Days |
|
|
 |
Chrome Valve Cover Set
Dress up your Hemi engine compartment with this Chrome Valve Cover Set
| Available for 426 Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
 |
Control Unit Wiring Harness Kit
For Electronic Ignitions
| Available for Hemi, Big Block, Small Block With Electronic Ignition
|
Availability:
Ships With 1 Business Days |
|
|
 |
Crank Bolt Package
These Crank Bolt Packages are used to attach the Damper to the Crankshaft
Our Price Starting At: $10.15
|
| Available for 426 Hemi, Big Block, Small Block Engine
|
Availability:
Ships With 3 Business Days |
|
|
 |
Crank Key Package
| Available for 426 Hemi, Big Block, Small Block, Slant Six Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Cylinder Head Bolt Set
Cylinder Head Bolt Set includes head bolts and washers for one cylinder head
| Available for Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
 |
Cylinder Head Hardware Kit
Cylinder Head Hardware Kit contains 4 head freeze plugs and 10 dowel pins for the rocker shaft stands
| Available for Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Jeep Wrangler Dana 60 Rear Military Axle Assembly
Available exclusively from Mopar Performance Jeep Wrangler military-grade axle assemblies for your Jeep Wrangler. These tough, genuine Jeep assemblies are designed for the military Wrangler (J8) and provide the next level of off-road performance for Wranglers. They come fully assembled and well equipped with 4.10 gears, JK wheel speed sensors, and massive, heavy-duty disc brake calipers and rotors. The Dana 60 rear axle is configured for leaf spring mounts. Adaptation of the rear axle to fit the suspension of any Jeep Jeep Wrangler is the responsibility of the purchaser
| Available for 2007-2009 Jeep Wrangler
|
Availability:
Ships With 3 Business Days |
|
|
|
Jeep Wrangler Dana 60 Rear Military Axle Assembly
Available exclusively from Mopar Performance Jeep Wrangler military-grade axle assemblies for your Jeep Wrangler. These tough, genuine Jeep assemblies are designed for the military Wrangler (J8) and provide the next level of off-road performance for Wranglers. They come fully assembled and well equipped with 4.10 gears, JK wheel speed sensors, and massive, heavy-duty disc brake calipers and rotors. The Dana 60 rear axle is configured for leaf spring mounts. Adaptation of the rear axle to fit the suspension of any Jeep Jeep Wrangler is the responsibility of the purchaser
Availability:
Ships With 3 Business Days |
|
|
 |
Deep Oil Pan
Improves the cooling and lubrication of critical transmission components
Our Price Starting At: $68.73
|
| Available for A727/A904 and A999 Transmission
|
Availability:
Ships With 1 Business Days |
|
|
 |
Dodge Challenger R/T Hood Scoop Insert Set
Don't install faded, cracked or damaged inserts on your brand new Rallye style hood. These exact replicas are the perfect compliment to your muscle car.
| Available for 1970-1974 Dodge Challenger R/T
|
Availability:
Ships With 1 Business Days |
|
|
 |
Dodge Challenger/Plymouth Barracuda Rocker Sill Plate
Unless your classic has been hermetically sealed since it was new, your rockersill plates are probably heavily scratched and/or damaged
| Available for 1970-1974 Dodge Challenger and Plymouth Barracuda
|
Availability:
Ships With 1 Business Days |
|
|
 |
Double Roller Chain and Sprocket Sets
These high-strength sets provide added durability and decreased rotational friction versus the production silent chains
| Available for 426 Hemi, Big Block
|
Availability:
Ships With 3 Business Days |
|
|
 |
Electronic Conversion Kit
Conversion packages to convert old point-type ignitions to electronic ignitions. Packages include vacuum advance electronic distributor with high-performance advance curve, wiring harness, electronic control unit and ballast resistor.
Our Price Starting At: $243.60
|
Availability:
Ships With 3 Business Days |
|
|
 |
Engine Teardown Gasket Set
Engine Teardown Gasket Set includes all gaskets needed for complete Hemi engine teardown
| Available for 1966 and Later 426 Hemi
|
Availability:
Ships With 3 Business Days |
|
|
 |
Forged Crankshaft
| Available for 426 Hemi, Wedge and "RB" Engine
|
Availability:
Ships With 3 Business Days |
|
|
 |
Freeze Plugs
These round, press-in engine block Freeze Plugs fit standard or Mopar Performance race cast iron blocks
| Available for 426 Hemi and Big Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Hydraulic Tappet
| Available for Hemi and Big Block
|
Availability:
Ships With 3 Business Days |
|
|
 |
Dodge Ram Lowering Kit
Mopar Performance lower kit!
| Available for 2006-2008 Dodge Ram Standard Cab Short Bed 2 Wheel Drive
|
Availability:
Ships With 3 Business Days |
|
|
 |
Dodge Caliber Lowering Springs
These Lowering Springs for the all-new Dodge Caliber lowers it a full 1.5 Inch from stock ride height and improves handling capability.
| Available for 2007 Dodge Caliber
|
Availability:
Ships With 1 Business Days |
|
|
 |
Jeep Commander Lowering Springs
Lowering kit includes all four springs made of high-tensile material to increase spring performance without bind
| Available for 2006-2008 Jeep Commander
|
Availability:
Ships With 1 Business Days |
|
|
 |
Mechanical Tappet
| Available for Hemi, Big Block, Small Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Chrysler 300 Mopar Peformance Control Module
Proper operation of the Mopar Performance Torque Converter requires installation of the Mopar Performance TCM Upgrade.
| Available for 2005-2007 Chrysler 300 With 5.7L Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Dodge Magnum Mopar Peformance Control Module
Proper operation of the Mopar Performance Torque Converter requires installation of the Mopar Performance TCM Upgrade.
| Available for 2005-2006 Dodge Magnum With 5.7L Engine
|
Availability:
Ships With 3 Business Days |
|
|
 |
Chrysler 300 Mopar Performance 6.1L Hemi Long Tube Headers
Besides dressing up the under-hood appearance of your Chrysler 300 and adding a more powerful sound to the 6.1L Hemi, these long-tube headers let the engine breathe better while providing more horsepower and increased torque.
Image Is Not exactHigh Flow Cats Not Included
| Available for 2005-2009 Chrysler 300 With 6.1L Hemi Engine
|
Availability:
Ships With 5 Business Days |
|
|
|
Dodge Challenger Mopar Performance 6.1L Hemi Long Tube Headers
Besides dressing up the under-hood appearance of your Dodge Challenger and adding a more powerful sound to the 6.1L Hemi, these long-tube headers let the engine breathe better while providing more horsepower and increased torque.
Image Is Not exactHigh Flow Cats Not Included
| Available for 2008-2009 Dodge Challenger With 6.1L Hemi Engine and Automatic Transmission
|
Availability:
Ships With 5 Business Days |
|
|
|
Dodge Charger Mopar Performance 6.1L Hemi Long Tube Headers
Besides dressing up the under-hood appearance of your Dodge Charger and adding a more powerful sound to the 6.1L Hemi, these long-tube headers let the engine breathe better while providing more horsepower and increased torque.
Image Is Not exactHigh Flow Cats Not Included
| Available for 2006-2009 Dodge Charger With 6.1L Hemi Engine
|
Availability:
Ships With 5 Business Days |
|
|
|
Dodge Magnum Mopar Performance 6.1L Hemi Long Tube Headers
Besides dressing up the under-hood appearance of your Dodge Magnum and adding a more powerful sound to the 6.1L Hemi, these long-tube headers let the engine breathe better while providing more horsepower and increased torque.
Image Is Not exactHigh Flow Cats Not Included
| Available for 2005-2008 Dodge Magnum With 6.1L Hemi Engine
|
Availability:
Ships With 5 Business Days |
|
|
 |
Chrysler 300 Mopar Performance Exhaust
Add Horsepower and Torque to your Chrysler 300. Combine with a Cold Air Intake system for a throaty, aggressive sound.
Our Price Starting At: $1.00
|
| Available for 2005-2008 Chrysler 300 With 3.5L and 5.7L Hemi Engine
|
Availability:
Ships With 1-2 Weeks |
|
|
|
Dodge Charger Mopar Performance Exhaust
Add Horsepower and Torque to your Dodge Charger. Combine with a Cold Air Intake system for a throaty, aggressive sound.
Our Price Starting At: $1.00
|
| Available for 2006-2008 Dodge Charger With 3.5L and 5.7L Hemi Engine
|
Availability:
Ships With 1-2 Weeks |
|
|
|
Dodge Magnum Mopar Performance Exhaust
Add Horsepower and Torque to your Dodge Magnum. Combine with a Cold Air Intake system for a throaty, aggressive sound.
Our Price Starting At: $1.00
|
| Available for 2005-2008 Dodge Magnum With 3.5L and 5.7L Hemi Engine
|
Availability:
Ships With 1-2 Weeks |
|
|
 |
Chrysler 300 Mopar Performance Powertrain Control Module
The Mopar Performance Powertrain Control Module Upgrade is designed to support the Mopar Performance Camshaft, Cold Air Intake, Exhaust Headers and Cat Back Exhaust.
Our Price Starting At: $345.60
|
| Available for 2005-2006 Chrysler 300 With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Dodge Charger Mopar Performance Powertrain Control Module
The Mopar Performance Powertrain Control Module Upgrade is designed to support the Mopar Performance Camshaft, Cold Air Intake, Exhaust Headers and Cat Back Exhaust.
Our Price Starting At: $345.60
|
| Available for 2006 Dodge Charger With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
|
Dodge Magnum Mopar Performance Powertrain Control Module
The Mopar Performance Powertrain Control Module Upgrade is designed to support the Mopar Performance Camshaft, Cold Air Intake, Exhaust Headers and Cat Back Exhaust.
Our Price Starting At: $345.60
|
| Available for 2005-2006 Dodge Magnum With 5.7L Hemi Engine
|
Availability:
Ships With 3 Business Days |
|
|
 |
Jeep Wrangler New Generation Front Axle Dana 44
These tough and rugged assemblies are completely assembled, and outfitted to be easily installed in 1997-2006 Jeep Wranglers. They include the very best "New-Generation Dana 44" technology, which until now, has never been offered for the Jeep Wrangler. Made-in-USA.
| Available for 1997-2006 Jeep Wrangler
|
Availability:
Ships With 3 Business Days |
|
|
 |
Jeep Wrangler New Generation Rear Axle Dana 44
These tough and rugged assemblies are completely assembled, and outfitted to be easily installed in 1997-2006 Jeep Wranglers. They include the very best "New-Generation Dana 44" technology, which until now, has never been offered for the Jeep Wrangler. Made-in-USA.
| Available for 1997-2006 Jeep Wrangler
|
Availability:
Ships With 3 Business Days |
|
|
 |
Offset Camshaft Bushing Set
Offset Camshaft Bushing Set includes 5 bushings; 2, 4, 6, 8 offset, plus 1 on-center bushing
| Available for 426 Hemi, Big Block, Slant Six Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Oil Seal Package
Oil Seal Package includes crank seals and installation tool
| Available for Hemi and Big Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Oil Slinger
| Available for 426 Hemi, Big Block, Small Block, Slant Six, 3.9L V6 Engines
|
Availability:
Ships With 1 Business Days |
|
|
 |
Original Replacement Distributor Cap
Replacement for the original tan-colored distributor cap used in Chrysler high-performance V8 muscle cars of the late 1960s and early 1970s
| Available for Big Block and Small Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
PCV Package
Kit contains 1 PCV valve cap, a PCV valve and nut, and 1 PCV valve retaining spring
Availability:
Ships With 3 Business Days |
|
|
 |
Pickup Coil and Lead Assembly
The Pickup Coil and Lead Assembly services electronic and mechanical tach drive distributors.
Availability:
Ships With 3 Business Days |
|
|
 |
Rear-Mounted Battery Kit
This kit is designed for moving the battery to the rear of the Mopar to improve weight distribution
| Available for Rear Wheel Drive Vehicles
|
Availability:
Ships With 3 Business Days |
|
|
 |
Resto Dual Ballast Resistor
The sharpest eyes will spot the correct ballast resistors on restoration projects
Availability:
Ships With 1 Business Days |
|
|
 |
Restoration Battery Tray
Manufactured to exact specifications, this tray comes e-coated to protect it from chemical and moisture exposure.
| Available for 1970-74 E-Body & 1971-74 B-Body
|
Availability:
Ships With 3 Business Days |
|
|
 |
Road Runner Decal
Mopar offers replacement Road Runner Decasl for the your Mopar. If your decals are damaged or badly faded, replace them with these brand new pieces. Beep-Beep!
Our Price Starting At: $29.87
|
Availability:
Ships With 3 Business Days |
|
|
 |
Roller Tappet Set
Roller Tappet Set includes matched pair with guide bar
| Available for Hemi and Big Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Jeep Wrangler Rubicon Locking Front Axle Assembly
Now available exclusively from Mopar Performance Rubicon front axle assemblies. Provides the next level of off road performance to your CJ, YJ or TJ. Axles are shipped with the current Jeep Wrangler Rubicon suspension brackets installed. They are completely assembled, with 4.10 gear ratio and a locking differential with locking sensor. Adaptation into a previous model Wrangler will be the responsibility of the purchaser.
| Available for All Jeep Wrangler
|
Availability:
Ships With 1 Business Days |
|
|
|
Jeep Wrangler Rubicon Locking Front Axle Assembly
Now available exclusively from Mopar Performance Rubicon front axle assemblies. Provides the next level of off road performance to your CJ, YJ or TJ. Axles are shipped with the current Jeep Wrangler Rubicon suspension brackets installed. They are completely assembled, with 4.10 gear ratio and a locking differential with locking sensor. Adaptation into a previous model Wrangler will be the responsibility of the purchaser.
| Available for All Jeep Wrangler
|
Availability:
Ships With 1 Business Days |
|
|
 |
Jeep Wrangler Rubicon Locking Rear Axle Assembly
Now available exclusively from Mopar Performance Rubicon rear axle assemblies. Provides the next level of off road performance to your CJ, YJ or TJ. Axles are shipped with the current Jeep Wrangler Rubicon suspension brackets installed. They are completely assembled, with 4.10 gear ratio and a locking differential with locking sensor. Adaptation into a previous model Wrangler will be the responsibility of the purchaser.
| Available for All Jeep Wrangler
|
Availability:
Ships With 1 Business Days |
|
|
|
Jeep Wrangler Rubicon Locking Rear Axle Assembly
Now available exclusively from Mopar Performance Rubicon rear axle assemblies. Provides the next level of off road performance to your CJ, YJ or TJ. Axles are shipped with the current Jeep Wrangler Rubicon suspension brackets installed. They are completely assembled, with 4.10 gear ratio and a locking differential with locking sensor. Adaptation into a previous model Wrangler will be the responsibility of the purchaser.
| Available for All Jeep Wrangler
|
Availability:
Ships With 1 Business Days |
|
|
 |
Six Pack Hood Decal
Proudly proclaim to the world what you've got under the hood
| Available for 1969-1/2 Super Bee 440 Six Pack "Lift-Off Hood"
|
Availability:
Ships With 3 Business Days |
|
|
 |
Dodge Caliber SRT-4 Mopar Performance Cold Air Intake
What's so great about cold air intakes? Cold air is much denser than hot, humid air and holds more oxygen. More oxygen going into an engine equals more combustion, thus more power
| Available for 2008-2009 Dodge Caliber SRT-4
|
Availability:
Ships With 3 Business Days |
|
|
 |
Jeep Grand Cherokee SRT-8 6.1L Mopar Performance Cold Air Intake
Heat up your performance with a steady flow of cold air! These bolt on systems are designed to allow cooler outside air in through a directional cone filter and funnel it directly into the intake manifold. These kits provide noticable horsepower and torque gains under varying atmospheric conditions.
| Available for 2006-2010 Jeep Grand Cherokee SRT-8 With 6.1L Hemi Engine
|
Availability:
Ships With 5 Business Days |
|
|
 |
Stamped Steel O.E. Black Wrinkle Valve Cover Set
Original equipment for all 1966�1971 426 Hemi engines, these stamped steel black wrinkle covers have spark plug wire brackets and rubber coated alternator wiring looms
Our Price Starting At: $679.65
|
| Available for 1966-1971 Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Super Gold ECU
Unit can handle the high current demand of the high-performance coil (P3690560), while keeping dwell variation to less than 1� from 1000 to 10,000 rpm.
Availability:
Ships With 3 Business Days |
|
|
 |
Timing Cover Chrome Bolt Package
Engine chrome dress-up projects are incomplete without chrome bolts
| Available for 426 Hemi and Big Block Engines
|
Availability:
Ships With 1 Business Days |
|
|
 |
Timing Cover Seal and Gasket
Front Timing Cover and Crank Seal
Our Price Starting At: $8.99
|
| Available for 426 Hemi and Big Block Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Vacuum Advanced Electronic Distributor
These vacuum advance electronic distribuotrs feature a high performnace advance curve and an adjustable vacuum advance unit
| Available for Small Block, Big Block and Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Valve Guides
Silicon-bronze alloy Valve Guides are designed modify, rebuild or repair aluminum heads
| Available for Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Valve Seals
Made of high-temp Viton material, these Valve Seals feature a full or semi-umbrella shape for best dual-purpose use
| Available for 426 Hemi and Magnum Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Valve Springs
| # |
Hgt |
Desc |
OD |
Wire Dia |
Lift |
Mat |
Retainer |
| 1 |
1.83"/
1.86" |
Single |
1.49" |
0.158" |
0.430"/
0.460" |
Chrome Vandium |
P4451533 |
| 2 |
1.83"/
1.86" |
Single |
1.53" |
0.224" |
0.440"/
0.500" |
Chrome Vandium |
P4452769, P4529288, P5007858 |
| 3 |
1.86"/
1.87" |
Single |
1.55" |
0.216" |
0.480"/
0.540" |
Chrome Silicon |
P4452769, P4289288 |
| 4 |
1.83"/
1.86" |
Dual |
1.52" |
0.215" |
0.500"/
0.610" |
Chrome Vandium |
P4529288, P4115785 |
| 5 |
1.86"/
1.88" |
Dual |
1.60" |
0.216" |
0.590"/
0.640" |
Chrome Silicon |
P4289288, P4115785 |
Our Price Starting At: $10.51
|
| Available for Hemi Engines
|
Availability:
Ships With 3 Business Days |
|
|
 |
Valve Stem Lash Caps
| Available for 426 Hemi, Big Block, Small Black and Magnum Engines
|
Availability:
Ships With 3 Business Days |
|
|
|
